$110.87
$92.39
Note: 1. This is the DIY version that comes unassembled. 2. Comes without a battery, charger, receiver or remote control. Item Specification 140mm Racing Frame Kit Wheel base: 140mm Frame...
Note: 1. This is the DIY version that comes unassembled. 2. Comes without a battery, charger, receiver or remote control. Item Specification 140mm Racing Frame Kit Wheel base: 140mm Frame...

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

FREE
SHIPPING

100% MONEY
BACK GUARANTEE

ONLINE
SUPPORT 24/7

Availability: 45 In Stock

Note:
1. This is the DIY version that comes unassembled.
2. Comes without a battery, charger, receiver or remote control.


Item Specification
140mm Racing Frame Kit

Wheel base: 140mm
Frame arm thickness: 3mm
Upper plate thickness: 1mm
Side plate thickness: 1mm
Frame kit material: 3K carbon fibre & CNC 6065 aluminium
 
1607 2800KV 2-4S Brushless Motor

KV: 2800KV
Lipo cell: 2-4S
Weight: 17.8g (includes wires)
Output shaft length: 14mm
Maximum pull: signal 630g (4S 3030 4-blade propeller)
Maximum power: 350W
Configu-ration: 9N/12P
Mounting holes distance: 12*12mm
Mounting holes: φM2
Bearing: NSK
N52 Strong NdFeB Magnet
Recommend propeller: 3 inch
 
4 IN 1 20A BLHeli_S ESC

Continuous current: 20A
Peak current: 25A (10S)
BEC output: no
Input voltage: 2-4S
Main control chip: 48mhz EFM8BB2
Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125
with 25V 150uf Capacitor ( Solder Well on ESC Board)
MOS: 3*3  
MOS type: vs3610ae 30v64a
 
 F4 Flight Controller                                                   ( FC Product Link )
Brand Name: Eachine 
Item name: F4 Flight Controller
Main control chip: STM32F405
Gyro: MPU6000
Input Voltage: 2-4S Lipo
Black Box: NO
Barometer: NO
Firmware: VGRC/VGOODRC
F4 Buzzer Interface: YES
Betaflight OSD: AT7456E
UART6: RC
UART5: DJI
UART2: VTX
Weight: 3.6g
PCB Size: 24.6x24.6mm
Mounting Hole: 20x20mm
- Support PPM, IBUS, SBUS, DSMX Receiver
  
700TVL CMOS Camera

Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 700TVL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
White balance: off
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.1mm
Lens operating voltage: DC 5-12V
Working current: 70mA (low power consumption)
Working temperature: -20℃~-60℃
Humidity: 0%~98% 
 
XF5805 40CH 0/25/100/200mW  VTX                            ( VTX Product Link)
Brand name: Eachine 
Item name: 5.8G 40CH 25/100/200/300mw  VTX
Supports TBS SmartAudio
Transmitting power: 25/100/200/300mw switchable 
Channel: 40CH
Full video format: NTSC/PAL
Input voltage: 7V~24V
Power dissipation: 12V/600MW
Size: 25×20×6mm
Weight: ≤3.2g (except antenna)
With copper pipe mini antenna (ipex antenna)
Make sure the antenna is installed at the output end before powering up to avoid damaging internal components.
Usage: for tyro79 140mm 3 inch DIY version RC drone
New 3040 3-blade propeller

Material: PC
Mounting hole: 5mm
Center thickness: 6mm
Quantity: 2 CW & 2 CCW
Color: ( Delivery color randomly)
Weight: 5g a pair   

 
Lipo Battery
Not included
Recommend 2-3S 450-650mah
 

New Vtx Setting:
1. Long Press Button 2S, entering into CH Setting Mode.
 
2. Red Light flash 1 time, Green Light flash 1-8 time ( CH1-CH8).
   At this time , a short press of the key CH plus 1 will flash corresponding number of times. CH1-8 cycle.
 
3. Then, Long Press 2S again, entering into Band Setting Mode.
    Red Light flash 2 times, Green Light flash 1-5 time ( A-B-E-FS-Race Band).
 
4. Long Press 2S once again, entering into Power Setting Mode.
    Red Light flash 3 times, Green Light flash 1-4 times ( Power 25mW- 100mW-200mW-300mW)
 
5. Finally, Long Press 2S,  Logout setting mode. Or it will logout automatically while no operation after 30S.
 
Package included:
1 x 140mm racing frame kit
2 x 1607 2800KV brushless motor CW
2 x 1607 2800KV brushless motor CCW
1 x 4 IN 1 20A BLHeli_S ESC
1 x F4 flight controller
1 x 700TVL CMOS camera
1 x 5.8G 40CH 0mw/25mw/200mw switchable VTX
2 x 3040 3-blade propeller CW
2 x 3040 3-blade propeller CCW

Note:
1. This is the DIY version that comes unassembled.
2. Comes without a battery, charger, receiver or remote control.


Item Specification
140mm Racing Frame Kit

Wheel base: 140mm
Frame arm thickness: 3mm
Upper plate thickness: 1mm
Side plate thickness: 1mm
Frame kit material: 3K carbon fibre & CNC 6065 aluminium
 
1607 2800KV 2-4S Brushless Motor

KV: 2800KV
Lipo cell: 2-4S
Weight: 17.8g (includes wires)
Output shaft length: 14mm
Maximum pull: signal 630g (4S 3030 4-blade propeller)
Maximum power: 350W
Configu-ration: 9N/12P
Mounting holes distance: 12*12mm
Mounting holes: φM2
Bearing: NSK
N52 Strong NdFeB Magnet
Recommend propeller: 3 inch
 
4 IN 1 20A BLHeli_S ESC

Continuous current: 20A
Peak current: 25A (10S)
BEC output: no
Input voltage: 2-4S
Main control chip: 48mhz EFM8BB2
Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125
with 25V 150uf Capacitor ( Solder Well on ESC Board)
MOS: 3*3  
MOS type: vs3610ae 30v64a
 
 F4 Flight Controller                                                   ( FC Product Link )
Brand Name: Eachine 
Item name: F4 Flight Controller
Main control chip: STM32F405
Gyro: MPU6000
Input Voltage: 2-4S Lipo
Black Box: NO
Barometer: NO
Firmware: VGRC/VGOODRC
F4 Buzzer Interface: YES
Betaflight OSD: AT7456E
UART6: RC
UART5: DJI
UART2: VTX
Weight: 3.6g
PCB Size: 24.6x24.6mm
Mounting Hole: 20x20mm
- Support PPM, IBUS, SBUS, DSMX Receiver
  
700TVL CMOS Camera

Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 700TVL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00, up to 55dB
White balance: off
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.1mm
Lens operating voltage: DC 5-12V
Working current: 70mA (low power consumption)
Working temperature: -20℃~-60℃
Humidity: 0%~98% 
 
XF5805 40CH 0/25/100/200mW  VTX                            ( VTX Product Link)
Brand name: Eachine 
Item name: 5.8G 40CH 25/100/200/300mw  VTX
Supports TBS SmartAudio
Transmitting power: 25/100/200/300mw switchable 
Channel: 40CH
Full video format: NTSC/PAL
Input voltage: 7V~24V
Power dissipation: 12V/600MW
Size: 25×20×6mm
Weight: ≤3.2g (except antenna)
With copper pipe mini antenna (ipex antenna)
Make sure the antenna is installed at the output end before powering up to avoid damaging internal components.
Usage: for tyro79 140mm 3 inch DIY version RC drone
New 3040 3-blade propeller

Material: PC
Mounting hole: 5mm
Center thickness: 6mm
Quantity: 2 CW & 2 CCW
Color: ( Delivery color randomly)
Weight: 5g a pair   

 
Lipo Battery
Not included
Recommend 2-3S 450-650mah
 

New Vtx Setting:
1. Long Press Button 2S, entering into CH Setting Mode.
 
2. Red Light flash 1 time, Green Light flash 1-8 time ( CH1-CH8).
   At this time , a short press of the key CH plus 1 will flash corresponding number of times. CH1-8 cycle.
 
3. Then, Long Press 2S again, entering into Band Setting Mode.
    Red Light flash 2 times, Green Light flash 1-5 time ( A-B-E-FS-Race Band).
 
4. Long Press 2S once again, entering into Power Setting Mode.
    Red Light flash 3 times, Green Light flash 1-4 times ( Power 25mW- 100mW-200mW-300mW)
 
5. Finally, Long Press 2S,  Logout setting mode. Or it will logout automatically while no operation after 30S.
 
Package included:
1 x 140mm racing frame kit
2 x 1607 2800KV brushless motor CW
2 x 1607 2800KV brushless motor CCW
1 x 4 IN 1 20A BLHeli_S ESC
1 x F4 flight controller
1 x 700TVL CMOS camera
1 x 5.8G 40CH 0mw/25mw/200mw switchable VTX
2 x 3040 3-blade propeller CW
2 x 3040 3-blade propeller CCW